Applicator Gun and Mixing Nozzle Guide
NORTON OFFERING
PART
18 ELEMENT
24 ELEMENT
PNEUMATIC GUN
MANUAL GUN
PNEUMATIC GUN
NUMBER
SIZE
MIXING NOZZLE
MIXING NOZZLE
400 ML
400 ML
600 ML
#04627
#04628
#41396
#41398
#41397
Epoxy Panel Bonding Adhesive
04674
400ml
•
•
•
Epoxy Rigid Repair Adhesive and Filler
04675
400ml
•
•
•
Epoxy Flexible Repair Adhesive and Filler
04676
400ml
•
•
•
Fiberglass Matting Adhesive
04680
400ml
•
•
•
Urethene Adhesive – 3
04671
400ml
•
•
•
Urethene Adhesive – 10
04672
400ml
•
•
•
Urethene Adhesive – 35
04673
400ml
•
•
•
Urethene Adhesive – 3
04677
600ml
•
•
Urethene Adhesive – 10
04678
600ml
•
•
Urethene Adhesive – 35
04679
600ml
•
•
Urethane Adhesives
Road Worthy, Shop Tested,
OEM Approved:
Truck Line Adhesives
SMC/FRP Fiberglass Repair and
Panel Bonding
400ml 1:1 Cartridge
PART
OEM APPROVED
CLAMPING OR
SANDING OR
NUMBER
PLIOGRIP® NO.
OPEN TIME
WORK TIME
FIXTURE TIME
PAINTING TIME
04671
7773
3 minutes
3-1/2 minutes 10 minutes
30 minutes
04672
7779
10 minutes
17 minutes
30 minutes
1 hour
04673
7770
35 minutes
50 minutes
1-1/2 hours
3 hours
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627
600ml 1:1 Cartridge
PART
OEM APPROVED
CLAMPING OR
SANDING OR
NUMBER
PLIOGRIP® NO.
OPEN TIME
WORK TIME
FIXTURE TIME
PAINTING TIME
04677
7773
3 minutes
3-1/2 minutes 10 minutes
30 minutes
04678
7779
10 minutes
17 minutes
30 minutes
60 minutes
04679
7770
35 minutes
50 minutes
90 minutes
3 hours
USE APPLICATOR GUN #41397-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627
Times will increase as
temperatures decrease.
Times shown above are
at 77f/25c.
Full cure time is 24 hours
but this may be
accelerated with heat.
Do not apply polyester
based putty/fillers on
urethane products.
SMC/FRP Fiberglass Repair
Fiberglass Matting Adhesive
❚
A low viscosity two-part urethane used to saturate fiberglass cloth when
preparing backup patches
❚
The self-leveling feature allows the Matting Adhesive to be used for filling
cracks and channels as well
Fiberglass Mat
❚
For reinforcing SMC, FRP and fiberglass repairs
❚
Perfect for large repairs where extra reinforcement is needed
Fiberglass and SMC Cloth
❚
Excellent for any backup repair – large or small
❚
Conforms to any shape
400ml 2:1 Cartridge
PART
CLAMPING OR
SANDING OR
NUMBER
DESCRIPTION
WORK TIME
FIXTURE TIME
PAINTING TIME
04674
Epoxy Panel Bonding Adhesive
90 minutes
4 hours
8 hours
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628. GLASS BEADS FOR ADEQUATE SPACING.
SMC/FRP
Fiberglass
Panel
Bonding
Epoxy Adhesives
Times will increase as temperatures
decrease.
Times shown above are at 77f/25c.
Full cure time is 24 hours but this may be
accelerated with heat.
Rigid Parts Repair and Flexible Plastic
Parts Repair
Quickly repair SMC, FRP, fiberglass and plastic parts. Designed for easy
sanding and excellent feather edging, these products are a proven adhesive
and filler for all rigid and flexible parts. Formulated to finish the front side
of repairs used over the top of urethane adhesives.
400ml 1:1 Cartridge
PART
SANDING OR
NUMBER
DESCRIPTION
WORK TIME
PAINTING TIME
04675
Rigid Parts Epoxy Adhesive
6 mintues
12 minutes
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628
400ml 1:1 Cartridge
PART
SANDING OR
NUMBER
DESCRIPTION
WORK TIME
PAINTING TIME
04676
Flexible Parts Epoxy Adhesive
6 mintues
12 minutes
04625
Adhesion Promoter for TPO Repair -
-
USE APPLICATOR GUN
#41398
MANUAL OR
#41396
PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE
#04628
#04675
#04676
Accessories
© Saint-Gobain Abrasives, Inc. February 2007
PLIOGRIP® ADHESIVE Manufactured by Ashland Inc., Columbus,
OH • ®PLIOGRIP is a registered trademark of, Ashland Inc.
The Norton logo and SpeedGrip are registered trademarks of
Saint-Gobain Abrasives, Inc.
FORM # 7890
If polyester putty/filler must be used, skim coat
over the SpeedGrip repair area using SpeedGrip
Rigid Repair Adhesive
#04675
or SpeedGrip Flexible
Repair Adhesive
#04676
.
400ml 1:1 Cartridge
PART
OEM APPROVED
SANDING OR
NUMBER
DESCRIPTION
PLIOGRIP® NO.
SIZE
OPEN TIME
PAINTING TIME
04680
Fiberglass Matting Adhesive
7779-L
400ml 1:1 cartridge
10 minutes
45 minutes
04690
Fiberglass Mat
-
36" X 38" (9.5 sq. ft.)
–
–
04691
Fiberglass and SMC Cloth
-
36" X 38" (9.5 sq. ft.)
–
–
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628.
PART
NUMBER DESCRIPTION
41396
Pneumatic Applicator Gun 400ml
41398
Manual Applicator Gun 400ml
41397
Pneumatic Applicator Gun 600ml
04627
Mixing Tip Square 18 Element (blue)
04628
Mixing Tip Square 24 Element (green)
PART
NUMBER DESCRIPTION
04631
Structural Backing Patch
04632
Nylon Reinforcing Tape
04623
Plastic Parts Cleaner – 1 quart
82780
Panel & Adhesive Cleaner – 1 quart
www.
nortonautomotive.com
FOR
TECHNICAL HELP:
1 866 879-3761
®
OEM APPROVED
®
