24
2. Select the appropriate measuring mode by pressing M button.
For selecting the measuring mode, please refer to the “FOUR
MEASURING MODES” section.
3. Obtain a Blood Sample
Use the pre-set lancing device to puncture the desired site. After
penetration, discard the first drop of blood
with a clean cotton swab. Gently squeeze
the punctured area to obtain another drop of
blood. Be careful NOT to smear the blood
sample.
The volume of blood sample must be at least
0.5 microliter (μL) of volume. (
actual size).
4. Apply the Sample
Hold the blood drop to touch the absorbent hole of the test strip. Blood
will be drawn in and after the confirmation window is completely filled,
the meter begins counting down.
Summary of Contents for TD-4277
