GlucoRx TD-4230 Owner'S Manual Download

Page: 3 / 56

IMPORTANT SAFETY INSTRUCTIONS

READ THIS BEFORE USE

The following basic safety precautions should always be taken.

1. This device does NOT serve as a cure for any symptoms or

diseases. The data measured are for reference only. Always consult

your physician to have the results interpreted.

2. Use the device only for the intended use described in this manual.

3. Do not use accessories which are not supplied by the manufacturer.

4. Keep the equipment and its flexible cord away from hot surfaces.

5. Do not use the equipment where aerosol sprays are being used, or

where oxygen is being administered.

6. Do not use the device if it is not working properly or has been

damaged.

7. Read all instructions thoroughly and practice the test before using

the product to test your blood glucose. Do all quality control checks

as directed and consult with a diabetes healthcare professional.

8. Keep the device and testing supplies away from young children.

Small items such as the battery cover, batteries, test strips, lancets,

vial caps are choking hazards.

KEEP THESE INSTRUCTIONS

Summary of Contents for TD-4230

























































Search results

Summary of Contents for TD-4230

Reviews:

Related manuals for TD-4230

Brands by name

Popular brands

GlucoRx TD-4230, Owner'S Manual

Search results

Summary of Contents for TD-4230

Reviews:

Related manuals for TD-4230

Brands by name

Popular brands