manualshive.com logo in svg

GlucoRx TD-4230, Owner'S Manual

Share
Download
GlucoRx TD-4230 Owner'S Manual Download Page 10

10

Your system includes:

 A meter                                       

 Test strips

 Sterile lancets                             

 Owner’s manual

 Sporty carrying case                   

 Your first time user guide  

 Daily log book                            

 Warranty card 

 Lancing device with clear cap for Alternative Site Testing

 Control solution

The three main parts are included in this system: the blood glucose 

meter, test strips, and a control solution. These products have been 

designed, tested, and proven to work together as a system to measure 

the concentration of your blood glucose precisely. 

Always use the same brand name of test strips and TaiDoc control 

solution with the blood glucose meter.

 

Contents of the System

 NOTE

  Please make sure that all products listed above are contained and 

sealed in the package before using this system. If you find any imper-
fection in our products, please return the whole system to the place of 
purchase.

  There are 3 levels for TaiDoc control solutions: low, normal and high. 

Please note that the other two levels are optional and are not included 
in the standard kit. Please ask your local agent for availability.

TD-4230 

TD-4230 

WARRANTY  CARD

CUADERNO DE REGISTRO

SELF-TEST LOG BOOK

   

For recording

¡D

Blood glucose test results

¡D

Insulin and medication doses

¡D

Notes

Summary of Contents for TD-4230

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands