GLP
German Light Production
(1.0)
21
5 Change the Lamp
For a frictionless operation pleas read this chapter carefully and follow all instructions.
5.1 Safety
Regulations
•
Pull out the main plug!
•
Wait min. 20 minutes after the last operation to cool down the fixture.
•
Don’t touch the bulb of the lamp with bare fingers (this can cause damages).
•
Before you put the
Y
Y
P
P
O
O
C
C
5
5
7
7
5
5
C
C
O
O
L
L
O
O
R
R
into operation close the casing,
otherwise your retina can be hurt!
5.2 Realize the Lamp Change
1. Pull out the main plug!
2. The lamp can be changed in a very comfortable way directly from the backside
of the case without opening the head.
3. Open the four recessed head screws (1, 2, 3 and 4) of the backside lamp
sheet and remove it carefully.
4. Remove the old or broken lamp by opening the two sidewise lamp screws.
Attention:
The glass bulb of the lamp can splinter. For that reason remove the
lamp with safety gloves or some cloth.
5. Put in the new lamp securely with a tight fit into the socket and close the two
lamp screws. The lamp filler neck must not in the direction lamp or lenses.
Attention:
Use only the original lamp type!
6. Pull the lamp holder safely back in the shaft and close the four screws.
7. The running time of the lamp
LA1
can be cleared in the
Time
Menu.
6
6
Maintenance and Cleaning the
Y
Y
P
P
O
O
C
C
5
5
7
7
5
5
C
C
O
O
L
L
O
O
R
R
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not built up on or within the fixture. Otherwise the fixture's light-output will
be significantly reduced. Regular cleaning will not only ensure the maximum light-
output, but will also allow the fixture to function reliable throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
