German Light Products
®
Highlander Wash Quick Start and Safety Manual
25
Figure 7. Removing the lamp
See Figure 7. Twist the lamp base (arrowed) counterclockwise to release its bayonet
mount, then remove the lamp from the fixture.
Take a new lamp of the type specified for the fixture. See Figure 8. Position the lamp
so that the metal rod (arrowed) on the lamp will face upwards, and line up the
bayonet mount pins with the pin slots in the lampholder. Insert the lamp into the
lampholder and twist clockwise until locked into position. Do not touch the glass bulb
of the lamp with your fingers or let it become dirty. If you get any dirt, grease or oil
from your fingers on the bulb, clean it with an alcohol wipe.
Close the lamp door and fasten it with its locking screw (arrowed in Figure 6).
Release the tilt lock and be prepared for the fixture to light up and move suddenly.
You can now reapply power.
Figure 8. Metal rod on lamp must face upwards
PRELIMINARY
Summary of Contents for Highlander Wash
