German Light Products®
Fusion Stick FS20 Quick Start and Safety Manual Rev. A
27
9.
Service
Cleaning
FS20 fixtures
require occasional cleaning to prevent the buildup of dust, dirt, and
residue from atmospheric effects. Failure to keep the fixture clean will significantly
reduce light output and may cause heat buildup and damage that is not covered by
the product warranty. Regular cleaning will ensure maximum performance and
reliable operation.
The cleaning schedule depends on the operating environment. Check fixtures
regularly for signs of dirt buildup.
You can clean the fixture using a soft cloth slightly dampened with a household or
automotive glass cleaning product. Do not apply pressure to the clear front or display
on the back of the fixture, as you may scratch these surfaces.
Installing a glare shield
The FS20 is supplied with a glare shield that can be installed on the front of the fixture to
reduce lateral light spill if required.
Figure 16. FS20 Glare Shield
To install a Glare Shield:
See Figure 16. Slide the Glare Shield into the channel provided on the side of the
fixture where you want to prevent light spill.
Insert the two supplied grub screws into the threaded holes (arrowed) in the side of
the fixture and tighten them until they grip the Glare Shield firmly.
Warning!
There are no user-serviceable parts inside the fixture. Opening
the fixture can compromise its IP65 rating and cause damage that is not
covered by the product warranty. Any service operation that requires
removal of a cover must be performed by a professional service
technician with the tools, skills, and personal protective equipment to
maintain high-powered lighting equipment safely and efficiently.
