German Light Products®
Fusion Stick FS20 Quick Start and Safety Manual Rev. A
25
7.
Connecting to DMX data
Check that all cables and connectors are suitable for the installation environment and
application (see recommendations in ‘Avoiding damage to the fixture’ on page 9).
Use digital 110 Ohm DMX cable with IP65 5-pin XLR connectors to supply DMX data to
fixtures.
Keep connectors sealed with their rubber caps at all times when not in use.
The FS20 has two 5-pin XLR sockets for IN and THRU connections to a DMX data link.
FS20 fixtures support the USITT DMX 512A signal protocol. They also support RDM
(Remote Device Management).
If you would like advice with planning and installing a DMX link, your GLP supplier will
be happy to provide assistance.
