Supplied By www.heating spares.co Tel. 0161 620 6677
2
220562A
1 G e n e r a l
Diagram 1.1
Sheet Metal Parts
WARNING. When installing or servicing this fire care
should be taken when handling sheet metal parts, to
avoid any possibility of personal injury.
1.2 Statutory Requirements
The installation of this fire front must be carried out by a
competent person, in accordance with the current issue
and relevant requirements of:
Manufacturer's instructions, supplied.
The Gas Safety (Installation and Use) Regulations,
The Building Regulations, Local Gas Undertaking, The
Building Standards (Scotland) Regulations (applicable in
Scotland), The Health and Safety at Work Act and
Control of Substances Hazardous to Health, The
Electricity at Work Regulations and any applicable local
regulations.
Detailed recommendations are contained in the current
issue of the following British Standards and Codes of
Practice:
BS1251, BS5440 Part 1 and 2, BS5871, BS6891,
BS7671.
Manufacturer’s instructions must not be taken as
overriding statutory requirements.
1.3 B.S.I. Certification
This fire front is certificated to the current issue of S.I.T
15, for performance and safety. It is, therefore,
important that no alteration is made to the fire without
permission, in writing, from Hepworth Heating Ltd.
725mm
4019
The instructions consist of three parts, Installation and
Servicing Instructions for the Back Boiler, Installation
and Servicing Instructions for the Fire Front and
Instructions for Use. They are the property of the user
and must be handed to them on completion of the
installation.
1 General Notes and Information
This Glow-worm Gas fire front is to be used only with a
Glow-worm 45F, 45FR, 56F or 56FR Back Boiler Unit.
The fire front is delivered in two cardboard cartons,
which together contain all the parts necessary for the
installation of the fire front.
If the back boiler and fire front are to be installed at the
same time please read both sets of Installation
Instructions before starting.
Wherever possible, all materials, appliances and
components to be used shall comply with the
requirements of applicable British Standards.
Where no British Standards exists, materials and
equipment should be fit for their purpose and of suitable
quality and workmanship.
1.1 Important Notice
This fire front and back boiler are for use on natural gas
as distributed in the United Kingdom (G20) and cannot
be used on any other gas.
191mm
560mm
191mm
