8
0020008566A
FLUE ELBOW
COMBUSTION
ANALYSER
TEST POINT
FLUE DUCT
EXTENSION
Important Notes
To ensure the continued efficient and safe operation of the
boiler it is recommended that it is checked and serviced at
regular intervals. The frequency of servicing will depend upon
the particular installation and usage, but in general once a year
should be enough.
It is the Law that any servicing is carried out by a
competent
person
.
When replacing a part on this appliance, use only spare parts
that you can be assured conform to the safety and performance
specification that we require. Do not use reconditioned or copy
parts that have not been clearly authorised by Glow-worm.
5.1 General
Measurement of the products of combustion can be achieved
by connection of a probe to the combustion analyser test point,
see diagram 5.1.
IMPORTANT NOTE:
Products of combustion will be discharged
when the cap is removed. It is important to replace the cap
immediately..
Testing Flue Gases:
If any doubt exists that the flue products
are not exhausting correctly, investigate by use of a gas
analyser (FGA).
Diagram 5.1
12853
5 Servicing
Because of our constant endeavour for improvement, details may vary slightly from those shown in these instructions.
