42
Glomar AG
l
Seestrasse 11
l
CH-9326 Horn
l
T +41 71 841 70 70
l
www.glomar.ch
42
STILO 60
english
10. Description of the compression head
Item
Description
Function
1
4
2
3
1
Compression
head
60 kN compression head to crimp
terminals and connectors with up to
300 mm²
2
Dies holder
to take the crimping dies
3
Handle
to open and close the compression
head
4
Crimping dies
crimping dies with various profiles
The compression head is designed to crimp terminals and connectors with up to
30 mm² maximum cable cross sections.
A
Caution:
Before starting operation make sure that all active parts in the working
area are disconnected. If this is not possible, take appropriate protection
measures for working in the proximity of active parts.
First prepare a pair of dies
4
adequate for the specific usage. Please check that you
use the corresponding dies in the tables of our catalogue. Then open the head for the
compression
1
. To do this, push the hook
3
out sideways. Then insert the two dies in the
guides
2
and fix them on the piston in the spring provided. Now position the material to
be compressed in the tool and close the die holder guides
2
and the hook (3), to start
the connection operation. The tool is now ready for usage. Now remove the die out
sidewards of the compression head.
A
Caution:
This tool works under pressure. Keep hands out of danger zone between
the two dies during the crimping process.
