REV. 03.09.04
Denervated Muscles :
Channels available
Channels 1, 3
Maximum intensity
60 mA
Impulses
Triangular, 1000 ms
Rectangular-trapezoidal, 500 ms
Iontophoresis :
Channels available
Channel 1
Constant current
Yes
Minimum intensity
0 mA, 1000 Ohm
Maximum intensity
10 mA, 1000 Ohm; 0.1 mA, 1000 Ohm steps
Minimum time
1 min
Maximum time
99 min
Specifications
Batteries
Rechargeable Ni-MH accumulator, 7.2 V, 1.5 Ah
Globus model
Power supply
Modello Globus
Exterior
Acrylonitrile butadiene styrene (ABS), food-contact
grade
Protection level
IP 20
Size
160 mm x 99 mm x 35.4 mm
Weight
404 gr
Certifications
EU Medical Device Directive (MDD, 93/42/EEC)
The Globus Electrostimulator is furnished with a set of rechargeable nickel-metal hydrate bat-
teries , which have high yield without "memory effect". Recharge the batteries when the bat-
tery light on the display ( ) indicates ¼.
To charge the batteries, turn off the electrostimulator and detach the electrodes. Attach the
supplied battery charger by inserting the plug in the appropriate inlet on the electrostimulator
(figure). The LED on the charger lights when the connection is correctly made. The first time
the batteries are charged, be sure not to interrupt the process until complete, about 10 hours.
If the electrostimulator is connected for longer periods (but not greater than 72 h), the batte-
ries will not be damaged.
Do not use battery chargers other than the one supplied. To replace the electrostimulator's
batteries, contact an authorized service center.
Attention:
-
While the batteries are being charged, the electrostimulator must not be connected to the
electrodes.
- If the battery charger is connected to the electrostimulator when the instrument is on, it will
turn off automatically.
- If the battery charger, the electrical cord or the connector show signs of wear or damage,
replace immediately.
9
BATTERY CHARGING
ILD 41070200
110 V
MB072C015UK
230 V
ILD 41V 0720200
230 V
