32
Rev. 1 del 24.10.2017
In the descriptions of the treatments, the best levels of intensities are recommended.
NOTE: The recommended levels of current are only indicative.
NOTE: For Microcurrents programs, it is not necessary to set an intensity value (in mA)
because this is preset and automatically activated for all phases.
Open circuit
The device has a check of power emissions. If the operator increases the intensity
level above 10 mA and the circuit is open (cables are not connected to the device
and electrodes are not applied to the skin), the electrostimulator brings immediately
the intensity to 0 mA. Therefore, before starting a program, make sure that the
cables are connected to the device and that the electrodes are not worn, as this
could decrease their conduction capacity. NOTE: Use the Microcurrents programs
only on channels 1 and 3 with the gray cables supplied. If the cables are not
connected or they are of the wrong type, the program will not start. Check the
cables and the connections.
Moderate
Maximum
Elevated
Intermediate
From 10 mA to 20 mA
At the maximum level of tolerance, but below the pain
threshold
From 20 mA to 30 mA
Above 30 mA
Summary of Contents for Champion GL4
Page 1: ...Rev 04 15 ...
Page 2: ...2 Rev 1 del 24 10 2017 ...
Page 59: ...59 Rev 1 del 24 10 2017 ...
Page 60: ...60 Rev 1 del 24 10 2017 ...
