Globus Champion GL4 User Manual Download Page 10 | Manualshive

Page: 10 / 60

Globus Champion GL4 User Manual Download Page 10

10

Rev. 1 del 24.10.2017

CONNECTIONS

Cable connection outlets and power supply

Attention:
If the package, the cable or the connector of the charger show signs of wear or
damage, replace it instantly.

How to connect the cables

To connect the cables to the device, plug them in the intended inlets in the upper
part of the unit (see picture).

Insert the cables with the grooves facing downwards.

The inlets are placed exactly under the corresponding channels.

NOTE: For EMS and TENS currents use indifferently the 4 channels with colored
cables. For microcurrents use only channels 1 and 3. For ionophoresis use only
channel 1.

Electrode application

Take the electrodes from the original package; all new electrodes have a seal on
the package. Be sure that the device is off. To start, connect the two cable plugs to
the electrodes, then disconnect the electrodes from their position and apply them
on the skin. To place the electrodes correctly, see the pictures included in this
manual.
After the use, place the electrodes in their original position again.
ATTENTION: Do not unplug the electrodes if the unit is working.

«
...
8
9
10
11
12
...
»

Summary of Contents for Champion GL4





























































Reviews:

No comments