8
a serial cable.
TV: This is used to connect your TV through SCART cable.
SPDIF: Digital Audio interface, connect to AV amplifier SPDIF (optical) input terminal.
ANT IN (optional): Connect to Analog TV antenna.
TV OUT (optional): This is used to connect your TV through RF cable.
8. Connecting Your System
How to connect your STB to various systems
There are several ways of connecting the STB to your TV, VCR and/or Hi-Fi SYSTEM. Consult your
local supplier for assistance in setting-up your system that is best suited to your requirements.
Connect STB to a TV set
Connect your STB to a TV set with SCART, if your TV set is equipped for it. Alternatively you can
use A/V, TV out (UHF) or S/Video jacks.
Connect STB to a VCR
Connect the SCART jack from the VCR to the back of your STB. Alternatively you can use A/V, TV
out (UHF) or S/Video jacks.
Connect STB to a Hi-Fi System
Connect a RCA stereo cable from the AUDIO L/R jacks, S/PDIF on your STB to the LINE, AUX,
SPARE or EXTRA input jacks on your Hi-Fi System.
Connect STB to a Digital Audio System
If you have a DAC with S/PDIF coaxial cable input, you can connect the STB with it to enjoy higher
quality sound. Connect S/PDIF coaxial cable to a digital amplifier.
Loop Through
If you have another analogue or digital STB and you wish to use the same LNB then you can
connect it via the loop through. Connect one end of the coaxial cable to the Loop Through on the
STB and connect the other end to the LNB IN on your second STB.
TV with Motorized System (DiSEqC 1.2)
