Globisens Labdisc Enviro, Quick Start Manual

Page: 22 / 26

Pullman Academic
Better Learning Outcomes
Page 22
20
3.2.2 Pairing with a PC running Windows OS
1. Start the GlobiLab software.
2. Right click the Bluetooth icon, located on the
status bar at bottom right corner of the GlobiLab .
3. This action opens a pop- up menu. From the menu select “ find more
Labdiscs ”. The computer opens the “ add a device ” dialog box and starts
searching for the Bluetooth device.
4. Your Labdisc will be displayed as “ Labdisc-xxxx ” where “xxxx” are the 4
last digits of the Labdisc serial number sticker. Select this device and
press Next .
5. Select the 2
nd
option: “ Enter the device pairing code ” and press Next .
6. In the next dialog box enter “1234” as t he pairing code and click Next .
Wait for the computer to finish the process and announce that the
Labdisc and computer were paired successfully.
7. Right click the Bluetooth icon on the status bar . Choose the Labdisc
you’ve just paired and click on it. The computer will connect to the
Labdisc and will turn the Bluetooth icon blue.
3.2.3 Pairing with a Mac OS
1. Open the Bluetooth menu from the Mac menu bar and select "Set Up
Bluetooth Device...".
2. A dialog box opens. Your Labdisc will be displayed as “ Labdisc-xxxx ”
where “xxxx” are the 4 last digits of the Labdisc serial number sticker.
Select this device and press Continue .
3. Put your Labdisc in pairing mode again (see 3.2.1)