Globecar 2 Win, Instruction Manual

Page: 89 / 98

89
Reisemobil - 06/02-2 - GLO-0005-00EN
Maintenance
13
13.3.3 Surface-mounted halogen light (swivelling)
Changing bulbs: Use a suitable tool (e.g. a screwdriver) to lever out and remove the cover
(Fig. 76,1).
Remove halogen bulb.
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
13.4 Spare parts
For safety reasons, spare parts for pieces of equipment must correspond with
manufacturer's instructions and be permitted by the manufacturer as a spare
part. These spare parts may only be fitted by the manufacturer or an author-
ised specialist workshop. The Globecar dealers are available for any spare
parts requirement.
When ordering spare parts, please indicate the serial number and the vehicle
type to your Globecar dealer.
The vehicle described in this instruction manual is built and equipped to factory
standards. Special equipment is offered depending on its purpose or use.
When fitting special equipment check if such equipment has to be entered in
the vehicle documents. Observe the max. permissible gross weight. Your
Globecar dealer will be pleased to advise you.
Fig. 76 Surface-mounted halogen light
(swivelling)
Every alteration of the original condition of the vehicle can alter road
behaviour and jeopardize road safety.
The special equipment and original spare parts recommended by us
have been specially developed and supplied for your vehicle. These
products are available at your Globecar dealer. Your Globecar dealer is
informed about admissible technical details and carries out the required
work correctly.
The use of accessories, parts and fittings not supplied by us may cause
damage to the vehicle and jeopardize road safety. Even if an expert's
report, a general type approval or a design certification exists, there is
no guarantee for the proper quality of the product.
No liability can be assumed for damage caused by products which have
not been released by us. This also applies to impermissible alterations
to the vehicle.