Globecar 2 Win, Instruction Manual

Page: 81 / 98

81
Reisemobil - 06/02-2 - GLO-0005-00EN
Care
12
12Care
12.1 External care
12.1.1 Washing with a high-pressure cleaner
Before cleaning the vehicle with a high-pressure cleaner, observe the oper-
ating instructions of the high-pressure cleaner.
During washing, keep the following minimum distance between the vehicle
and the high-pressure jet:
With nozzle for circular jet approx. 700 mm
When using a 25° fan nozzle and dirt cutter, approx. 300 mm
Take into consideration that the jet of water comes out of the cleaning nozzle
with pressure. The vehicle may be damaged by incorrect handling of the high-
pressure cleaner. The temperature of the water should not be above 60 °C.
Keep the jet of water in constant movement during the washing process. Do
not direct the water jet at clearances, built-in electrical parts, plugs, seals, the
refrigerator ventilation grill or the skylights. The vehicle may be damaged or
water may enter the interior.
12.1.2 Windows of acrylic glass
Acrylic glass windows are delicate and require very careful handling.
12.1.3 Waste water tank
Clean the waste water tank after every use of the vehicle as motorhome, at
least several times a year.
Cleaning: Empty the waste water tank.
Thoroughly rinse out the waste water tank with fresh water.
If possible, clean waste water sensors through the cleaning opening by
hand.
Do not clean the tyres with a high-pressure cleaner. The tyres might be
damaged.
Never rub acrylic glass windows dry as dust particles might damage the
surface!
Only clean acrylic glass windows with plenty of warm water, some dish
washing liquid and a soft cloth.
Never use glass cleaning agents with chemical, abrasive or alcohol-con-
taining additives. Premature brittleness of the panes and associated cracks
may result from their use.
Avoid contact of cleansing agents used for the body (e.g. tar- or silicone-
removing agents) with acrylic glass.
Do not clean vehicle in car wash.
Do not attach stickers to the acrylic glass windows.
Having cleaned the vehicle rinse acrylic glass with sufficient clear water.
Treat rubber seals with glycerin.
An acrylic glass cleanser with antistatic effect is suitable for a follow-up
treatment. Small scratches can be treated with an acrylic glass polish. This
agent is available at your Globecar dealer.