Page 8
Installation and Proper Grounding
9. Locate the sharpener basket. Affix the sharpener basket in the desire location. NOTE: The slicer sharpener is
to be returned to this basket after use only after it has been cleaned and sanitized.
GROUNDING PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY
GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN
ELECTRICIAN. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUND
PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 8-1 and Fig. 8-2).
10. Make sure warning labels are properly positioned and legible and the instruction manual is available near
the slicer. Place the Spanish labels on the slicer if your work force requires them.
11. Complete the warranty registration online at www.globeslicers.com/warranty.asp.
12. Post the provided wall chart in a visible area near the slicer to be referred to often for cleaning, sanitizing,
and inspecting your slicer. Refer to the wall chart and this Owner’s Manual for proper cleaning, sanitizing and
inspection of your slicer.
12. Clean the slicer using the procedures outlined in the cleaning section (pages 11 through 14) prior to using the
slicer.
13. Contact your local representative, or Globe directly, if you have any questions or problems with the installation
or operation of this slicer.
Figure 8-1 Correct
Figure 8-2 Incorrect
