manualshive.com logo in svg

GlobalTime Electronic GTT-400, Manual, Page: 3 / 19

Share
Download
GlobalTime Electronic GTT-400 Manual Download Page 3

GlobalTime

™

NTP Server

1

Chapter 6 Specific Performance Index of the Server................................................................................Page 17

Chapter 1 Basic Information of the Device

Modern networks require accurate, secure, and reliable time service. The security-hardened GlobalTime™ NTP
Server is purpose- Built to deliver exact hardware-based Network Time Protocol (NTP) timestamps. The
unparalleled accuracy and security is rounded out with outstanding ease-of- use features for reliable network time
services ready to meet user network and business operation needs today and in the future. High Security and
Capacity.

1.1. Features

• Stratum 1 operation via GPS/BeiDou/GLONASS satellites
• One/ two/ four standard GbE ports, all with patented NTP hardware timestamping
• Security-hardened NTP Reflector™ with firewall protection
• Web-based management with high-security cipher suite
• Exceptional time accuracy to UTC
• Extended environmental specifications
• IPv4 on all ports
• Rubidium atomic clock or OCXO oscillator upgrades
• Single power supply or dual power supply option
• Can be set as a slave time server to synchronize with host time server
• One 10M 100M 1000M adaptive network interface
• NTP Reflector option: 20000 NTP client mode three requests per second
• TOD/1PPS/10MHz out
• MTBF: 90000 Hours

1.2. Applications

• Synchronizes hundreds of thousands of NTP clients
• Security-hardened for peace-of-mind time service operations
• Multiple GbE NTP ports for easy network configuration and adaptation
• Best-in-class time accuracy for improved log file timestamp precision and usability
• Very reliable and easy-to-use network time appliance for modern networks and business operations

1.3. Network Protocols

RFC 1119 1305 NTP v2/v3/v4
RFC 1769 2030 SNTP v2/v3/v4
TIME
DAYTIME
SNMP v1/v2/v3
SSH
HTTPS
FTP

1.4. Mechanical/Environmental

• Size: 48cm x 30cm x 4.4cm, 5kg. 1U rack mount, including BNCs
• Power: 10W, 110-230V AC

Summary of Contents for GTT-400




















Reviews:

No comments