manualshive.com logo in svg

GlobalTime Electronic GTT-400, Manual

Share
Download
GlobalTime Electronic GTT-400 Manual Download Page 12

GlobalTime

™

NTP Server

10

Second, modify the default windows time server. For example, we set it to be 192.168.2.8.
Third, click “apply” and then “update”. Windows synchronizes once in a week under default settings. If the
interface display that the PRC is not available, please open the control panel, choose “management tool”/”service”,
find “window time” and then choose opening the service automatically and start the service.
Fourth, we can modify the registry to change the synchronization frequency if we want. The specific registry info is
at:

\

HKEY_LOCAL_MACHINE

\

SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\SpecialPollInterval.

The default is 604800 = 60 × 60 × 24 × 7, namely, a week.
synchronization once a day: The default is 86400
synchronization once an hour: The default is 3600
synchronization once ten minutes: The default is 600

Fifthly, after modifying the registry, you should stop windows time service and restart it. Then the synchronization
frequency can be updated.
If it has been installed with other time synchronization software, you need to uninstall the software and restart the
computer. Then the windows time service can work normally.
For Win2000/98 operating system, the time synchronization software provided by our firm or
provided by the third-party are both available. The specific configuration can be referred to
the respective user manual.
For UNIX systems, in general, there is ntpd daemon or xntpd daemon. Create the ntp.conf configuration file under the /
ETC directory and type "server ******" ( time server IP) in it. Then starting the daemon will do.
Regarding the details, please refer to the user manual or consult us.

3.7. Troubleshooting
3.7.1. Display Wrong Time When Power is on

After started, the server will display 1

st

, Jan, 2000. Only after it receives the satellite signal and lock, it will display

correct time. So please make sure that the antenna is working properly.

Summary of Contents for GTT-400




















Reviews:

No comments

Brands by name

Popular brands

Load more brands