GlobalTime
™
NTP Server
14
4.2.1. Main Login Interface
1. Network Information
2. NTP Configuration
3. NTP Status
4. BD/GPS Status
5. System Information
6. System funtion
7. Change the password
8. About
Q. Exit
Choice:
When we input the corresponding numbers and click the enter button, we will enter into the related interface,
when we input “q” or “Q” and then click the enter button, we will go back to the previous menu.
4.2.2. How to change the configuration of network
When we choose Network Information, we will see the below information:
eth0
ip: 192.168.0.8
netmask: 255.255.255.0 gateway:192.168.2.1
Do you want to change the configuration of network?
Please input N or Y ?
Input Q: return.
4.2.3. NTP Configuration
When we choose NTP Configuration, we will see the below information:
1. NTP server
2. NTP broadcast
3. MD5 keys
4. Select NTP MD5 key
Q.Exit
choice:
When GPS / BD signal is available, NTP Server can work as stratum 1 server, when GPS/ BD signal is not available,
it can work as stratus 2 server.
When there is many SNTP terminal in the network, we can do configuration for the NTP broadcast, the time
service precision is lower than C/S.
MD5 cipher code is used to set the NTP timing service with authentication pattern, it is available in open
environment.
No matter the timing service is with or without authentication pattern, the NTP server will react to it.
4.2.4 NTP Status
stratum=1
precision=-15
rootdelay=0.000,
rootdisp=1.2
refid=GPS
