Globalstar GSP-1700 Quick Reference Card Download Page 97

Page: 97 / 120

Battery Care and Maintenance

Battery chargers

There are three (3) battery charger options (see Accessories, page 99):

■

AC wall charger

■

Universal travel charger

■

Car power adapter/vehicle charger

Note

To avoid damaging the phone when using the AC wall charger,
plug the charger into the power source first, and then into the
phone.

About battery charging

■

The battery recharges while the phone is in use.

■

For faster charging, turn the phone off.

■

The battery does not need to be completely drained before recharging.

■

After connecting the phone to one of the chargers, check the charging
status:

❑

If the battery is charging, the bars on the battery indicator

flash in sequence.

❑

If the phone is turned off, a message displays and the bars on the
battery indicator

flash in sequence. When charging is

complete, a message displays on the screen.

■

The universal travel charger allows you to:

❑

Charge the battery while it is attached to the phone.

❑

Charge the battery during use or when turned off.

❑

Charge another battery at the same time.

Low battery

The phone alerts you when the battery is low.

■

The battery indicator flashes.

00-80-C6302-2.book Page 87 Tuesday, August 22, 2006 3:31 PM

Summary of Contents for GSP-1700

























































































































Search results

Summary of Contents for GSP-1700

Reviews:

Related manuals for GSP-1700

Brands by name

Popular brands

Globalstar GSP-1700, Quick Reference Card

Search results

Summary of Contents for GSP-1700

Reviews:

Related manuals for GSP-1700

Brands by name

Popular brands