Globalstar GSP-1700 Quick Reference Card Download Page 98

Page: 98 / 120

Battery Care and Maintenance

■

The phone beeps three times (if you are on a call, the phone continues
to beep every minute).

■

The message “Low Battery! Recharge Battery Soon” displays on the
screen.

■

If the battery level gets too low, the phone turns off and loses any call
in progress.

❑

Before turning off, the phone alerts you with five beeps.

❑

The message “Low Battery, Turning Off Phone Now” displays on
the screen.

Tip

To turn off the battery alert, set the ringer volume to zero (0).

Battery removal

To remove the battery, complete the following steps.

Turn the power off to avoid losing data.

Press and hold the battery release latch in the direction of the arrow to
release it from the phone.

Lift the battery cover by the release latch.

Remove battery as described in Battery replacement, page 89.

press

lift

00-80-C6302-2.book Page 88 Tuesday, August 22, 2006 3:31 PM

Summary of Contents for GSP-1700

























































































































Search results

Summary of Contents for GSP-1700

Reviews:

Related manuals for GSP-1700

Brands by name

Popular brands

Globalstar GSP-1700, Quick Reference Card

Search results

Summary of Contents for GSP-1700

Reviews:

Related manuals for GSP-1700

Brands by name

Popular brands