communication from the server shortly after the end-device has sent an uplink
transmission. Downlink communications from the server at any other time will have
to wait until the next scheduled uplink.
Bi-directional end-devices with maximal receive slots (Class C): End-devices of
Class C have nearly continuously open receive windows, only closed when
transmitting.
MOST-Link Configuration
Please refer to below AT Command List for the detail setting.
AAT1
－
Command for parameters setting up and send /receive data.
AAT3
－
Command for functions setting up under MOST-Link.
Under this protocol, the default mode is Disable (P0=0), which is the payload data
transmission in transparent. It only supports command A0, A1 for AES128 encryption
function.
Use AT command [AAT3 P0=1] to Enable MOST-Link mode.
Save Settings
Command
Description
AAT1 Save
Respond
ok
after parameters are saved.
Reset and Reboot CPU of LM-130H1
Command
Description
AAT1 Reset
Respond
ok
after entering the command.
Restore to Firmware Default Value
Command
Description
AAT1 Restore
Respond
ok
after entering the command.
Enable / Disable MOST Link mode
Command
Description
AAT3 P0=[parameter]
[Parameter]:1/0
1
: enable MOST-Link
0
: disable MOST-Link
Response:
ok
﹣
parameter is valid
invalid_param
﹣
parameter is not valid