Globalsat LoRa LM-110H1, User Manual, Page: 12 / 18

Read LM-
130H1’s Role Status
Command Description
AAT1 MA=?
Response:
0
﹣
Node
1
﹣
Gateway
Send Payload by M.O.S.T. protocol
Command Description
AAT1 T1=[parameter]
* MOST-Link disable, P0=0
[Parameter]: Payload value in
hexadecimal character (1-99 Bytes).
Response : This command would get two
responses. The first one responding if the
command is valid or not. After the payload is
sent out, it would get the second response.
1
st
Response:
ok
﹣
parameter is valid
invalid_param
﹣
parameter is not valid
2
nd
Response:
TX_OK
﹣
payload is sent out
TX_BUSY
﹣
payload is not sent out
Received Data from End
Node AAT1 R1=RSSI,Data

RSSI: The received signal strength indicator
(Range: 1~160). The bigger the value is, the
stronger the signal strength is.

Data:
in hexadecimal character (1-99 Bytes). It is
ended with <CR><LF>