Globalcom MADIC BV1000GTV, User Manual

Page: 15 / 26

MADIC ITALIA
Mod.N:Q060R06
15 / 26
10.2 BV1000GTV SPECIFICATIONS
S1 (Serial port 1): it’s a RS232 serial port TX and RX plus two RS232 criteria, one in input and one in output,
usable for flow control.
S2 S3 (Serial port 2 & 3) : they are two RS232 serial port TX and RX. On the connector is available a +5V to
power an external device with a current consumption max of 100ma.
I2C-GPIO : it’s a connector where are located an I2C interface, two general purpose input and two general
purpose output at logic level 3.3V. I2C is buffered for long cable extension.
SAM : The SAM connector host up two SAM modules.
The access to the SAM connector is done removing the SAM cover.
ETH : Ethernet interface is a 10/100MB.
USB-A & OTG : USB type A and USB OTG have two current limiters. The total current available for external
devices connected to this connector is 500 mA.
SERVICE : A Service push bottom is read by the applications running on REE.
Pressing the push bottom could be executed also the wakeup of the processor if previously set in
shutdown.
AUDIO : The device has a speaker for audio connected to a class D amplifier .
PROXIMITY DETECTION: The proximity sensor is used to detect the proximity of a target in front to the
device. It’s located at the entrance of the smart card.
MICROCHIP CARD READER : it accepts all cards compliant with EMV V4.0 Book 1, December 2000. It has 8
contacts and has the capability to detect the presence or withdraw of the card. It can manage
asynchronous cards or synchronous memory cards with a power supply of 1.8V, 3V or 5V.
MAGSTRIPE READER : it has tracks data encryption capability. It supports up to 3 tracks card reading at the
same time. Signal processing techniques are employed to recover F2F encoded data reliably from head
signals with severe fluctuation of signal amplitude, widely varying bit interval, and jittery bit position.
DISPLAY : it’s a TFT 4,3” provided with backlight.
TOUCH SCREEN : PCAP Touch.
BLE : Bluetooth Low Energy, the Bluetooth can be used for communication with mobile phones and must
not be used for payment (FCC ID: XPYANNAB1). Bluetooth comply with essential requirements and other
relevant provisions of Radio Equipment Directive (RED) 2014/53/EU.