manualshive.com logo in svg

Global MAXI S 4500LX, Owner'S Manual, Page: 9 / 40

Share
Download
Global MAXI S 4500LX Owner'S Manual Download Page 9

1.2.   Optional Equipment

•  S 410003 Foot Switch

 

A control located on the floor for the purpose of operating the chair with the foot versus the touch pad panels 

on either side of the chair back. This offers a “hands-free” method to positioning the chair.

•  S 900112W & S 900114W  Solarlite

A light source manufactured by Global Surgical

 

Corporation intended to be installed on the MAXI S 4500LX 

Examination Chair for the purpose of illuminating the area of interest during medical procedures and 

examinations. The S 900112W Solarlite has the power switch on the base. The S 900114W Solarlite has the 

power switch on the head.

For instructions on the installation of the Solarlite see “Solarlite

 

S 900 Series Exam Lights Installation Instructions” 

Part # 108-008-003

Section 1 

General Information

S 900112W Solarlite

S 900114W Solarlite

WARNING

!

CONNECTING EQUIPMENT TO THE MULTIPLE-SOCKET-OUTLET EFFECTIVELY 

LEADS TO CREATING AN MEDICAL ELECTRICAL SYSTEM AND THE RESULT CAN 

BE A REDUCED LEVEL OF SAFETY.  THE ONLY EQUIPMENT INTENDED TO BE 

CONNECTED TO THE CHAIR IS THE SOLARLITE MANUFACTURED BY GLOBAL 

SURGICAL CORPORATION.

1-2

Summary of Contents for MAXI S 4500LX









































Reviews:

No comments