manualshive.com logo in svg

Global MAXI S 4500LX, Owner'S Manual, Page: 4 / 40

Share
Download
Global MAXI S 4500LX Owner'S Manual Download Page 4

ii

SYMBOL DEFINITIONS

This symbol on the product is an attention symbol, alerting the user to read the 

Owner’s Manual for important installation, operating instructions or safety information.

This symbol on the product indicates a potential electrical shock hazard, and alerts the user to 

read the Owner’s Manual for important safety information.

Symbol indicating an accessible location on or within the chair where there is risk that a body 

part may become trapped.

S

ymbol indicating “not for general waste.” Recycle per the EUROPEAN WASTE ELECTRICAL 

AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE.

This symbol indicates earth ground

Equipotentiality

Type B Applied Part

For Professional Use Only

  

WARNING

!

This symbol indicates a situation in which incorrect handling through disregard of a warning 

might result in death or serious personal injury.

CAUTION

!

This symbol indicates a situation in which incorrect handling through disregard of a caution might 

result in personal injury or may result in damage to property.

NOTICE

This symbol indicates a message to avoid property damage or additional  information to help 

complete a procedure. 

Summary of Contents for MAXI S 4500LX









































Reviews:

No comments