manualshive.com logo in svg

Global MAXI S 4500LX, Owner'S Manual, Page: 25 / 40

Share
Download
Global MAXI S 4500LX Owner'S Manual Download Page 25

Section 3       

Operation

3-12

3.7. Positioning of patient:  

Patients should be allowed to enter or exit the chair only while the rotation lock is applied and the seat and back are in the 

Auto Return (Home) position. 

See Figure 3-11 

Position the footrest down to use as a step for patients as they enter or 

exit the chair.  For some patients, it may be helpful to move the armrests up and out of the way. 

See Section 3.8. 

The patient should be sitting in the chair with back firmly against the chair’s backrest and legs on the leg rest before  

bringing the chair into operation.

3.6. Footswitch (optional) 

The Footswitch is an ergonomically designed modular system for easy hands-free control of the chair.

BACK DOWN

SEAT DOWN

BACK UP

SEAT UP

Figure 3-10 Footswitch controls

WARNING

!

PATIENTS ENTERING OR EXITING THE CHAIR IN A POSITION OTHER THAN THE 

Home/AUTO RETURN POSITION COULD BE INJURED OR COULD CAUSE 

DAMAGE TO THE EQUIPMENT.

WARNING

!

TO MINIMIZE THE RISKS DUE TO MOVING PARTS, ENSURE THE PATIENT IS 

SEATED AS INTENDED WITH HEAD SUPPORTED BY THE HEADREST, ARMS 

SUPPORTED BY THE ARMRESTS AND LEGS SUPPORTED BY THE CALF REST 

BEFORE OPERATING THE CHAIR. OPERATORS SHOULD KEEP THEIR FREE 

HAND AND THEIR FEET AWAY FROM THE CHAIR WHILE THE CHAIR IS MOVING.

OPERATORS SHOULD KEEP THEIR FREE HAND AND THEIR FEET AWAY FROM 

THE CHAIR WHILE THE CHAIR IS MOVING.

Summary of Contents for MAXI S 4500LX









































Reviews:

No comments