![background image](http://html1.mh-extra.com/html/global/little-beat/little-beat_user-manual_2231989012.webp)
USER MANUAL
MODEL LITTLE BEAT
12
/
27
MODE
OF USE
Edition:
October 2019
FUSION
PROCEDURE FOR ELECTROFUSION FITTINGS
Rev.:
5
3.1.3
Unit connection
Connect the unit to a 230 V ± 15%/50-60 Hz mains source of
alternating current. For generator group specifications, please refer
To
chapter 5: TECHNICAL CHARACTERISTICS
.
IMPORTANT NOTES!
Connection to a generator:
the generator electric connection
where the control box mains is plugged must be normalized. Refer to
the generator’s User Manual.
Connection to the mains:
the building electric installation where
the control box mains is plugged must be fitted with a circuit
breaker.
Do not unplug the mains pulling from the cable.
Checking the fitting connection cable terminals before starting up the
unit is advised. There are different types of adopters depending on
the type pf fitting to be used.
The switch of the unit will light, indicating that there is an electrical power input.
Now turn on the switch.
NOTES!
In case to be activated the user authorization code (refer to clause
3.2.2 of this
Manual
), the display will show the following message:
ENTER PIN
******
Enter
the
PIN
number
corresponding to unit’s the serial
number.
ENTER PIN
PIN OK !!!
The initial screen is shown:
LITTLE BEAT
SERIALN xxx/YYYY
The display backlight will be enabled, an acoustic signal
heard and the following information will appear:
LITTLE BEAT
:
Model
SERIALN xxx
:
Serial number
YYYY
:
manufacturing year
From software version v. 1.7.0, once the display time has elapsed (2 seconds), the unit will
display the following screen
SOFT 1.9.2
110V
Showing the unit’s software version loaded and 110V (it is
displayed on 110V input voltage units only).
Once the display time has elapsed (2 seconds), the unit will display the following screen.
MAIN MENU:
1 FUSION
Press
OK
to validate this option.
To access to option
2. SETTINGS
, go to clause 3.2.
!