
© 2004-2005 Global IP Telecommunications. All Rights Reserved. p27
Global IP Telecommunications
Installation
1. Connect phone and handset
Connect phone and handset by provided cord.
2. Connect to power supply
Place the phone nearby of power socket. Plug the power cord adapter into the Power Jack. Then plug the
other end of the power cord adapter into the appropriate power socket.
3. Establish connection to the network
LAN users: Plug one end of the direct-connecting cable into RJ-45 jack which is located in the back of the
phone and connect the other end of calbe to hub.
ADSL/Cable Modem users: Plug the RJ-45 Ethernet corss-over cable into the RJ-45 Ethernet Jack. Plug
the other end of the cable into an ADSL/Cable modem router port.
4. Switch on the phone
Switch on the phone by sliding the switch which is located at the back side of the phone to the left. Ensure
that LED and display indicate activity.