![background image](http://html.mh-extra.com/html/global/g300/g300_user-manual_2232449012.webp)
© 2004-2005 Global IP Telecommunications. All Rights Reserved. p12
Global IP Telecommunications
Setup by WEB interface
You can use Microsoft Internet Explorer for setting up the phone if a computer is part of same network
segment.
Open a browser window and enter phone's IP address (e.g. 192.168.0.99) at the address line. IP address
will be displayed if you press "P1 (Local IP)" with handset down. A login dialog appears. Please enter
either
password (1234)
or
super password (19750407)
and click "Login".
Network
DHCP/IP/Modem/DSL:
Please choose the way you want to feed your phone with network parameter.
Static IP:
Enter IP address, subnet maske and router IP manually.
DHCP:
Source network parameter by DHCP.
PPPoE:
For direct use with ADSL and Cable Modem. Source network parameter direct
from Internet Service Provider (ISP).
Modem:
For sourcing the data from ISP. You will have to enter your ID and PIN at ppp
id and ppp pin.
PPPoE ID:
Enter ISP Username if PPPoE or Modem selected.
PPPoE PIN:
Enter ISP Password if PPPoE or Modem selected.
Local IP:
Please enter phone's IP if Static IP selected.
Subnet Mask:
Please enter subnet mask if Static IP selected.
Router ip:
Please enter router IP if Static IP selected.
DNS:
Please enter DNS Server IP if Static IP selected.
DNS 2:
Please enter alternative DNS Server IP.
MAC:
Phones MAC is printed on a lable at the underside.
Service provider
Service type:
Leave as standard if you are not using one of the specified services.
User name / account:
Enter user name / account.
Phone number:
Enter phone number. Mostly it is user name again.
Type of account:
Leave as "auto" if you can not select the type used by your VoIP provider.
Call type:
Choose "advanced" or leave as is.
DTMF signal trans.:
Choose special method if required or leave as is.
DTMF payload:
Choose special value if required or leave as is.
Domain name /
Realm:
Enter service address (e.g. subdomain.yourprovider.com)
Server to log in:
Enter registration server's address (e.g. subdomain.yourprovider.com)
Register port:
With SIP it is 5600
Signal port:
With SIP you can set to 0.
Controlport:
With SIP you can set to 0.
RTP port (voice):
With SIP it is 8000.
RTP type of service:
With SIP you can set to 0.
Register ttl:
With SIP you can set to 60.
g.729 jitter buffer size:
With SIP you can set to 0.
NAT
NAT:
Select the way you want to handle NAT. Mostly "auto" or "STUN" is used.
NAT address:
Enter STUN-Server address and port if "STUN" selected.
NAT ttl:
Select interval for sending keep alive packet to NAT device.