![background image](http://html1.mh-extra.com/html/global/flogos-lite/flogos-lite_instruction-manual_2231996023.webp)
Flogos-lite™ Instruction Manual
Flogos-lite
™
Problem
Soution
Random characters appear on the time
display.
Reset the Machine. To do so, turn it off, wait
10 seconds, and turn it back on.
The cutting arm fails to cut.
Reset the machine. To do so, turn it off, wait
10 seconds, and turn it back on. If that does
not work, to get through the event, manually
cut the Flogo using a piece of pipe. After the
event, call tech support.
The clear, plastic cylinder below the air
regulator has moisture in it.
Unscrew the black stopper at the bottom by
turning it counter clockwise. After releasing
the moisture, refasten the stopper.
The unitl will not turn on.
Check the power source.
One section of the Floge has large bubbles.
A hose hase come off of an aeration head.
Turn off the machine, drain the fluid from the
tank, reattach the hose to the head, and se-
cure it with the tie strap.
The whole Flogo has large bubbles.
Either the fluid level is low or the fluid needs
to be refreshed. Drain the tank and refil it with
a fresh mixture.
The Flogo no longer achieves lift off.
Check the helium level in the tank.
The Flogo sticks to the foam column after
being cut.
The foam is too wet. Decrease the air volume
settings.
Troubleshooting
20