Flogos-lite™ Instruction Manual
Flogos-lite
™
Draining the Flogo-lite
10
At the end of the event, shut down the machine:
• Turn the power switch off
• Close the helium valve
• Turn off the air source
• Disconnect the helium and air
• Unplug the power chord
The Flogo-lite machine must be drained before breaking down and boxing up.
Additional Instructions
To change the Flogo thickness
• Press the red stop button.
• Change the time as directed above.
• (As a possible alternative, you may want to adjust the helium and air settings).
• Press the green start button.
To change the stencil
• Press the red stop button.
• Turn the red gas switch off (O).
• Remove the old stencil, replace with new one and secure.
• Turn the red gas switch on (|).
• Press the green start button.
Adding fluid
If desired, additional premix of Flogo fluid and water may be added at anytime to the refill
reservoir at the lower right.
