Manual
3.3.2 Overwrite
REC. Setting
Scheduled Time
Overwrite
Section
Motion Detection
使用
说明书
Manual
3.3.4.1 Mask Area
Motion Detection
Mask Area
A. Enter into “Mask Area”, the screen will be
shown in a grid pattern as shown below.
“Mask Area” will allow the DVR to record
video based on motion detected in any
area that is selected as
blue.
The entire
image will be recorded if any motion is
detected in the grid for an area marked
with blue.
Yes
No
Sensitivity
A. System will delete the first 300MB
files once the SD card is full to
save new files
Speed
Noise Margin
3.3.3 Section Recording Time Set Up
REC. Setting
Scheduled Time
Overwrite
Section
Motion Detection
1min
15
分
钟
5min
15min
30min
1hr
B. Press the arrow keys to move the cursor to
choose the area that should be detected.
B. Set up section recording time
*Only available under “Manual”,
“Scheduled” and “Power Up Rec.”
modes
*2.5 min section recording time is
fixed under “Motion Detection” mode
C. Press “OK” to confirm.
D. Each area in the grid that is marked in
blue will trigger the motion detection.
If the area in the grid is not marked in blue,
it will not trigger motion detection.
3.3.4 Motion Detection
REC. Setting
Scheduled Time
Overwrite
Section
Motion Detection
3.3.4.2 Sensitivity
Motion Detection
Mask Area
Sensitivity
Speed
Noise Margin
C. Set motion detection details
High
Med
Low
High
level
Medium
level
Low
level
* System will be triggered very easily if
sensitivity is set lower than High level
*Low level setting is recommended.
10
11
Summary of Contents for BD-300G
Page 1: ...IR Camera Recorder Manual ...