background image

 

Infrared Patio Heater w/ Remote 

Control, Wall/Ceiling Mount

 

User Manual

                                                     

Model 246718 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Read this manual thoroughly prior to installation and operation. 

Keep these instructions in a safe location for future reference. 

For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2986. 

 

SAFETY INFORMATION 

 

TO AVOID RISK OF SERIOUS INJURY OR DAMAGE, READ AND FOLLOW ALL SAFETY PRECAUTIONS, 
OTHERWISE WARRANTY WILL BE VOIDED. 
 
WARNING: To prevent overheating, keep the air inlets and outlets clean and free of anything that may 
cause blockage. Often check all inlets and outlets to ensure they are clear of any dirt or dust 
accumulation. DO NOT COVER. 
 
WARNING: Parts of the heater may exceed 390ºF, contact with the heating tube, reflector, or mental 
parts near the heating tube, may cause severe BURNS. DO NOT let bare skin touch hot surfaces.

 

Switch 

off, unplug and allow the heater to completely cool off before making contact. 
 
WARNING: If provided, use handles when moving this heater. Keep combustible materials, such as 
furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet from the front of the heater and 
keep them away from the sides and rear. 

 

 

DO NOT insert fingers or objects into any of the openings. 

 

Keep all objects a minimum of 3-ft. away from the heater. 

   DO NOT cover the heater, or put objects such as fabrics or combustible materials in contact with the heater. 

 

DO NOT allow children to play with the appliance. Keep children away unless continuously supervised. 

 

Check that the voltage in the rating label fits the power supply. 

 

The use of these heaters is forbidden in any area where there is a presence of gases, explosives or 
inflammable objects. 

 

Neither the connecting cable nor any other object must come into contact with the heater. 

 

This heater should be switched off at the isolating switch before maintenance or repair work. 

 

Installation must be carried out by a certified technician in accordance with current local electrical 
regulations. 

 

The heater must not be installed just below an electrical socket-outlet. 

 

Never touch the heater with wet or humid hands or while barefoot. 

Summary of Contents for 246718








Reviews: