![background image](http://html.mh-extra.com/html/global/244280/244280_user-manual_2232494011.webp)
244280
www.globalindustrial.com
8
LOW LIMIT SET, HIGH LIMIT is set to zero
The display will show “OK” and the beeper function will sound when the weight is less than
the Low Limit. Above the Low Limit the display
will show “HI” and the beeper will be off.
HIGH LIMIT SET, LOW LIMIT is set to zero
The display will show “LO” and the beeper function will be off when the weight is less than
the High Limit. Above the High Limit the display
will show “OK” and the beeper will be on.
BOTH LIMITS SET. LOW is set greater than HIGH
The beeper will never sound and the display will show “LO” if the weight is less that the LOW
limit, and “HI” if the weight is greater than the Low Limit.
NOTE: The weight must be greater than 20 scale divisions for the check weighing to operate.
To disable the Check-Weighing function enter zero into both limits by pressing the
C
key
when the current limits are shown then pressing the
TARE
key to store the zero values
NOTE: you can set high/low limit in all normal weighing, percentage weighing and counting
mode.
4.7 Counting Mode
Before beginning, tare the weight of any container that will be used, leaving the empty
container on the scale.
Place the samples on the scale, press the
FUNC
key to begin. The scale will show "
SPL
. ---",
use 0-9 keys to input the samples quantity, press the
TARE
key to confirm. If you want to
reset the value, press the
C
key to clear the value.
Now put more weight on the scale, the display will show the number of parts(pcs).
Press the
%
key to display unit weight (g/pcs), Total weight (kg) or the count(pcs).
Press the
FUNC
key to return to normal weighing.
NOTE: Sample piece weight should not be less than 0.5d, otherwise, scale will display
“
LO.PC.WT
”, then back to normal weighing mode in 2s.
4.8 Percent Weighing Mode
The scale will allow a sample weight to be shown as 1% - 100%. Then any other weight
placed on the scale will be displayed as a percentage of the original sample.
Press
%
key to enter percentage weighing mode, the display will show “SPL.100%”.
Press
0
key to set to 1%, display shows “
SPL.001
”