Global Water
800-876-1172
•
globalw.com
V.
Installation
Sensor Installation:
The sensor uses a flange-type mounting scheme. Generally, the
sensor must be located so that the signal path is free of obstructions.
The sensor should be mounted level and perpendicular to the surface
of the material to be monitored. If the vessel has a sloped top,
consider using a self-aligning bulkhead fitting or a flange fitting with a
riser that will allow the sensor to be positioned relative to the material's
surface. Swivel mounts are a good choice in resolving this type of
installation problem. The use of a mounting bracket would be for open-
topped tanks, sumps or reservoirs. If the installation will have large
electrical equipment situated near the sensor, then earthed steel
conduit must be used.
- 7 -
