Global Water
800-876-1172
•
globalw.com
3.
Modifying Operating Parameters
From any of the Programming Position steps noted in Figure 5 on
page13, follow these steps to modify the operating parameter:
a)
Turn the programming ring to the right to Position 2, and
then back to Neutral, to bring up the editing cursor in the first
decimal place.
b)
Turning the ring to the right and back to Neutral increases
the current decimal place to the next highest value.
c)
Turning the ring to the left and back to Neutral moves the
cursor on to the next decimal position. Repeat step 2 to edit the
current position.
d)
To confirm the new value, continue to turn the ring to the left
and back to neutral until you cycle through all of the decimal
places and the next parameter shows on the display.
4.
Entering Additional Program Parameters
a)
After reaching the Code step, enter “111” by turning the ring
1 to Neutral, and you can access these additional parameters:
Figure 6
- 11 -
