Installation:
Good to know:
All seals during assembly and service should only be made with generally available Teflon tape.
Non-threaded connections are made with quick couplings.
How to Use the Quick Couplings
To connect a hose to a quick coupling correctly, cut it straight at right angles. After cutting the hose,
check its tip at a length of about 2.5 cm, to make sure there are no cuts, scratches or other
damage. Then insert the end of the hose into the coupling collar until it stops, that is, until the hose is
seated inside the sealing o-ring.
To disconnect the hose from the coupling, push the collar to the coupling body and pull out the hose.
5
