14
ASSEMBLY AND USER GUIDE
PORTABLE DEIONIZED WATER SYSTEM
10. Check the housing O-ring to ensure it is properly seated in the O-ring gland (See Fig. 8.5) and the car-
tridges gasket is seated on the top lid (See Fig. 8.6), then reinstall the housing back to the cap screwing
counterclockwise. Tighten the housing with wrench. (See Fig. 8.7) Do not over tighten.
Repeat this step for the other housing.
11. Refer to Fig. 8.8 for assembled ZeroSpot
™
system. Please re-check all bolts and nuts are properly hand
tight.
Please note:
garden hose and spray nozzle are not included with the system.
Fig. 8.5
- Check O-ring is properly seated
in the O-ring gland
O-ring
Fig. 8.7
- Tighten the housing with wrench
Counter-Clockwise
Fig. 8.8
- Assembled ZeroSpot
™
system
Fig. 8.6
- Gasket seated on the top lid
Gasket
