to change its value.
Figure 2- 3 Setting the Frequency
To Set the Output Amplitude
1. Press
Sine
→
Ampl, to set the amplitude.
The amplitude shown on the screen when the instrument is powered is the
default value or the set value beforehand. When changing the function, if
the current value is valid for the new waveform, it will be used sequentially.
If you want to set the waveform by high level or low level, press the
Ampl/HLevel or Offset/LLevel button again, to switch into the high level or
low level parameter (the current operation is displayed in inverse color).
Instruction
:
When using the keypad to enter the digit, you can use the left direction button to
move the cursor backward and delete or change the value of the previous digit.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
