background image

M

a

in

te

n

a

n

ce

The T-1400 is a low maintenance unit.

Cleaning and Storing the T-1400 “The Quiet Snow Machine”

In order to clean the T-1400, fill another plastic container half full with water and run the unit for 3-5 
minutes with the nozzle tilted downward into another container (if possible).  You may clean the 
plastic exterior of the T-1400 with detergent and water.  Do not stack other boxes or items on top of 
the T-1400. Store the T-1400 in a cool, dry environment between 40-80 degrees F. If electrical wires are 
frayed, contact the factory at (256) 229-5551 for service. 

Never operate the T-1400 with a frayed 

electrical wire.

Caution:

 Never remove the cover or housing screws on the Snow Machine. This action will nullify the 

warranty.  Unless  you  have  been  trained  by  a  certified  technician.  Contact  customer  service  at         
(256) 229-5551.

General Repair:  

The T-1400 Snow Machine has a lifetime warranty as long as Global Special Effects snow 

fluid is used, 

and should never require you to dissemble the unit.

 Please contact Global Special Effects 

service at (256) 229-5551 if you have questions on its operation or warranty

.

Maintenance  Information and Precautions

General Maintenance

Always use Global Special Effects approved snow solutions or the Lifetime Warranty will be nullified.

Summary of Contents for T-1400


















Reviews: