13
4.
Selecting the User Control for the ExpressCube
TM
System
The ExpressCube
™
Countertop system must have an operator controller to perform the
measurement functions. The ExpressCube
™
Countertop system can be controlled either by a
desktop computer using the USB interface or by using the ExpressCube
™
LCD Controller. If a
display is required to monitor the ExpressCube operation, it is recommended to use the customer
display.
4.1. ExpressCube
™
LCD Controller
The use of the ExpressCube
™
LCD Controller only requires the appropriate electrical connection as
described in the section above. The installation of the SizeIt
™
software is not required. Proceed to
the power-up section of this user guide.
4.2. Computer
Control
The use of a computer to control the ExpressCube
™
Countertop system will require the installation
and use of the SizeIt
™
software. Connect the USB cable as previously described and follow the
instructions outlined in the ExpressCube
™
SizeIt
™
Software Installation section of this guide.
"
In this User Guide, the term ‘control panel’ [underlined] will reference the device used to
control the ExpressCube
™
Countertop System. ( i.e. ExpressCube
™
LCD Controller
or
local
computer running SizeIt
™
software )
"
When the ExpressCube
™
LCD Controller is used to control the ExpressCube
™
Countertop system, the USB port is still active and can be used by a trained technical or
administration personnel to service the unit.
