G100 User Manual
G100 User Manual
Page 8 of 31
Configuration
There are three different ways to configure the G100 IP Phone: By using
the phone keypad, a standard web browser or through Telnet.
1. Setup through phone keypad
Note: Default password for G100 phones is 1234.
(1)Entering into setting mode
Use the keypad to enter the password of the phone (when debug is not
disabled (0[disable]), the default password is 1234; when debug is set to
0[disable], please use the super password 19750407, and then press”#” until this
prompt is displayed:
.
Then enter the super password again and press the red “Spk” button to let
the phone enter setting mode.
(2)Introduce of the function of keypad in the keypad setting mode
Press key
Function
Spk /Hand free
Enter into submenu of the current menu ;Acknowledge
modification
Scroll menu forward
Volume/-
Scroll menu backward
Local Number
Press to change a setting
Speed Dial
Cancel current setting; return to parent menu
Back Space
Backspace during entering of setting
Number keypad
Input new setting. Please see appendix for character
represented by each key
Password:
