G100 User Manual
G100 User Manual
Page 4 of 31
3. Function Keys
Key Function
Missed
With handset on hook, press this key to review missed number
Local Num
With handset on hook, press this key to check your phone number
Local IP
With handset on hook, press this key tocheck phone ip address
Dialed
With handset on hook, press this key to review dialed number
Answered
With handset on hook, press this key to review answered number
Redial
IP phone dials the last dialled number when button is pressed
Speak
Press this key to place a call without taking handset from hook
Increase the volumes of handset or speaker
Volume-
Decrease the volumes of handset or speaker
Keypad
With handset picked up or after pressing pressing the “Spk/hand
free” button, pressing these keys dials number
Performance and Features
z
Supports H.323 v4,compatible with most H.323 v1-v4 system and devices;
z
Built in H.323 proxy support to pass NAT;
z
Supports MGCP RFC2705
z
Supports SIP RFC3261
z
Supports Net2phone private protocol
z
Fast start and H.245 tunneling;
z
Outband DTMF transmit by H.245 user input or Q.931 keypad;
z
IEEE 802.3 /802.3 u 10 Base T / 100Base TX
z
Caller ID send and receive by Q.931;
z
Provides direct IP address to IP address call mode, direct PSTN call by a
voice gateway ,E.164 phone number call under the mode of GK;
z
Automatic gatekeeper discovery in LAN;
z
Call PSTN by ITSP’s prepaid card (eTalk,italk,ringtec etc);
z
DHCP support for automatic IP address assignment;
z
PPPoE support for ADSL or Cable modems;
z
Setup of all parameters through standard web browser (such as IE6.0), phone
keypad or telnet;
z
Supports G.723.1 5.3k/6.3k
，
G.729
，
G.711 A-Law µ-Law audio codec
algorithms;
z
Dynamic voice detection; Echo cancellation; Comfort noise generation;
z
Dynamic voice jitter buffer for high audio quality;
z
Tone generation and Local DTMF generation/detection according with ITU-T;
z
E.164 dial plan and customized dial rules;
z
80 entries each for missed call, answered call and dialed call;
z
100 phonebook entries;
