background image

1

Owner’s Manual

293149

TM

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain 
the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in 
personal injury and / or property damage! Retain instructions for future reference.

Global industrial Portable Air Conditi oners feature spot cooling 

for large areas where cooling of the enti re area is not practi cal. 

A dedicated spot cooling thermostat controls the unit in this ap-

plicati on.

These air conditi oners can also be used in smaller areas for room 

cooling.

Using the HEPA fi lter of grade H13, fi lter out dust with a size of

0.3 microns(

) A control panel provides ease of use and con-

tains a self-diagnosti c functi on and display, showing operati ng 

modes, room and set temperatures, and faults. 

If an abnormal operati on occurs, a visual display of the fault is 

shown. Caster wheels are included for easy portability. Suitable 

applicati ons include: a factory or work place, industrial kitchen, 

computer room, emergency cooling, outdoor event, etc.

Aft er unpacking the unit, carefully inspect unit for any damage that may have occurred during 

transit. Check for any loose, missing, or damaged parts.

Descripti on

Unpacking

Portable Air

Conditioners

293149

Figure 1

Owner’s Manual

293149

TM

Specifi cati ons

Model No.

Power Supply Ph-V-Hz

Cooling Capacity 

Btu/h

Power Con-

sumpti on Watt s

Rated Cur-

rent Amps

EER Btu/

Wh

293149

Single Phase, 115V, 60Hz

13,200

1,058

9.2

11.0

Model No.

Nema Plug

Power Cord 

Gauge AWG

Power Cord 

Length ft 

Dimensions 

W x D x H - in. (mm)

293149

5-15P

14

10

20.5 x 27 x 41.1 

(520 x 685 x 1044)

Summary of Contents for 293149

















Reviews: