© by GLOBAL GARDEN PRODUCTS
92
5.3
.
0
REMOVAL OF THE COLLECTOR CHANNEL
1 / 1
WORKSHOP MANUAL
page
from
1997
to
••••
5.3 REMOVAL OF THE COLLECTOR CHANNEL
Removing the collector channel gives access to:
– the deck lifting cable;
– the small side wheels of the drive belt;
– the control rod for engaging drive and the
micro-
switch to signal «neutral» (
➤
in hydrostatic drive
models).
Undo the two screws
(1)
the hold the support for
the ‘sack full’ signal microswitch, undo the inside
screws
(2)
fixing onto the rear plate and take out the
channel
(3)
.
When reassembling, fully tighten the screws
(2)
and
make sure that the collector channel moves freely.
Tightening torque
2
Screws for collector channel .......... 25 ÷ 30 Nm
3/2002
3
1
1
2
3
