WARNING:
Electrical Grounding Instruction
This appliance is equipped with a grounding type plug for your protection against shock hazard and should
be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from
this plug.
CAUTION:
Risk of fire and electric shock. Replace power cord with manufacturer’s cord set only,
part no/ PC-1.
INSTALLATION – Code Compliance
Global Cooking Systems ovens must be installed under a ventilation hood. Installation
of the exhaust hood must be in accordance with the Standard for Ventilation Control
and Fire Protection of Commercial Cooking Operations, NFPA 96.
NOTE
All aspects of the oven installation, including placement, utility connections, and ventilation, must comply
with all applicable local or national codes. Those codes supersede the requirements and guidelines
provided in this manual.
NOTE
In the USA, the oven installation must comply with local codes. In the absence of local codes, gas oven
installations must comply with the National Fuel Gas Code, ANSI Z223.1. Gas and electric ovens, when
installed, must be electrically grounded in accordance with local codes or in the absence of local codes,
with the National Electrical Code (NEC), or ANSI/NFPA70.
NOTE
In Canada, the oven installation must comply with local codes. In the absence of local codes, gas oven
installations must comply with the Natural Gas Installation Code, CAN/CGA-B149.1 or the Propane Gas
Installation Code, CAN/CGA-B149.2 as applicable. Gas and electric ovens must be electrically grounded
in accordance with local codes, or in the absence of local codes, with the Canadian Electrical Code
CSA C22.2
7
